Hi. We have Mikrotik devices and Zyxel switches on access level (GS1200-8) Switches receives address by DHCP from Mikrotik main router. Sometimes some switches (not all) can’t renew address from DHCP and have status waiting In mikrotik log we have next messages: "lease waiting, addressed to me, fix-selecting-init-reboot,… The router seems to be rejecting connection attempts when I try to access the web configurator by using the IP 192.168.1.1 on the web browser. I have tried disabling the pop-up blocker on the browser as instructed by the user guide. I also tried connecting to the router over the wi-fi and using a LAN cable. Registration. Login to the Zyxel device's web configuration page and go to the Configuration → Licensing → Registration menu. Click on the portal link to register the device to myZyxel.com 2.0 server ( For more Info visit our website : Really struggled with my old iPhone. Bought the missus a new one for Christmas and managed to get one of my Multy X WSQ50s to join the network and connect to my Zyxel router. Was cock a hoop, I thought at last! But hopes dashed, when I log in to the ‘wonderful’ app all it says is “connecting” but refuses to go any further. The most commonly used IP address for xDSL modem/routers is 192.168.1.x, this is also the IP address used by the Zyxel routers LAN. This will create an IP conflict and internet traffic may not work. In this case it is a good idea to change the LAN IP of the ZyWALL router to eliminate the conflict, if the modem cannot be set to a BRIDGE state. It seems that you have to enable the Push Button Control (PBC) of WPS under Wireless (see figure on page 86), and then you can push the WPS button. - WPS button needs to be pushed for greater than 1 second, so that the WLAN LED goes amber. - and then you can push WPS on the other device you want to connect. Really you need both but definitely the PC needs a static IP. Secondly you need to setup remote desktop on the PC to accept connections. Thirdly you need to forward port 3389 on your Zyxel Router to your PC's static IP. If you can browse the internet then I would say 99% sure NAT is already up and running. – CharlesH. OIzIOIR.

can t connect to zyxel router